NSK VarioSurg3 Tips

H-SG1

• For chin bone harvests, notably for the mental foramen and mandibular ramus. For general bone surgery.
  • POWER LEVEL [SURG] 150%
  • HIGH POWER
  • TiN coating
  • Dots mark 3, 6 and 9 mm from tip end
  • Five teeth ; 0.6 mm thick

SG1A

• For chin bone harvests, notably for the mental foramen and mandibular ramus. For general bone surgery.
  For use in deeper regions requiring longer tips
  • POWER LEVEL [SURG] 150%
  • TiN coating
  • Dots mark 3, 6, 9, 12 and 15 mm from tip end
  • Five teeth ; 0.6 mm thick

SG2R

• For excisions in areas with inclines or projections or which are otherwise hard to access with SG1 and other regular tips.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • Right curved tip*
  • Three teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

• 

SG2L

• For excisions in areas with inclines or projections or which are otherwise hard to access with SG1 and other regular tips.
  • POWER LEVL [SURG] 80%
  • TiN coating
  • Left curved tip*
  • Three teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

 SG8

• For clinical cases where movement is restricted around the end of the tip.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • Dots mark 3, 6 and 9 mm from tip end
  • Three teeth ; 0.6 mm thick

• 

• H-SG8

• For clinical cases where movement is restricted around the end of the tip.
  • POWER LEVEL [SURG] 150%
  • HIGH POWER
  • TiN coating
  • Dots mark 3, 6 and 9 mm from tip end
  • Three teeth ; 0.6 mm thick

• For harvesting bone from the mandibular ramus.
  • POWER LEVEL [SURG] 150%
  • HIGH POWER
  • TiN coating
  • 90 degree right curved tip*
  • Three teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

         SG8A

• For clinical cases where movement is restricted around the end of the tip.
  For use in deeper regions requiring longer tips.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • Dots mark 3, 6, 9, 12 and 15 mm from tip end
  • Three teeth ; 0.6 mm thick

H-SG8L

• For harvesting bone from the mandibular ramus.
  • POWER LEVEL [SURG] 150%
  • HIGH POWER
  • TiN coating
  • 90 degree left curved tip*
  • Three teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

SG14R

• For harvesting bone from the mandibular ramus.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • 90 degree right curved tip*
  • Five teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

SG14L

• For harvesting bone from the mandibular ramus.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • 90 degree left curved tip*
  • Five teeth ; 0.6 mm thick

  * The direction of the tip’s curve is defined by the tip’s anterior view.

SG19

• For excisions in areas with inclines or projections or which are otherwise hard to access with SG1 and other regular tips.
  For cutting curved surfaces.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • Dot mark 3 mm from tip end
  • Five teeth ; 0.8 mm thick

SG30

• For regions that are hard to access with regular tips, notably the posterior mandible or curved areas.
  For narrow cutting to reduce bone loss. Also suitable for corticotomies.
  • POWER LEVEL [SURG] 50%
  • TiN coating
  • Sharp edge
  • 0.5 mm thick

          Model:SG58

• For regions that are hard to access with regular tips, notably the posterior mandible or curved areas.
  For removing tori on the posterior mandible or mandibular lingual surface.
  • POWER LEVEL [SURG] 80%
  • TiN coating
  • Dots mark 3, 6 and 9 mm from tip end
  • Three teeth ; 0.6 mm thick